Dyson Airblade WD04 Low Hand Dryer

Dyson Airblade Tap Short hand dryer with low sink faucet 2-in-1:

• Airblade™ hand drying technology in the sink faucet
• Takes up little space
• Washing and drying hands at the sink
• No water on the floor
• Saves water
• HEPA filter captures 99.95% of particles from the air, including bacteria and viruses
• HACCP International certification confirms safety for use in the food sector
• Automatic system flushing every 24 hours helps avoid water stagnation
• Has the Quiet Mark
• Touch-free operation
• Drying time is 14 seconds
• Operating costs are only 140 PLN per year
• Low carbon footprint

Dyson Airblade Tap Short 2-in-1 dryer-faucet parameters:

Dyson Airblade Tap Short dryer

• Housing material: Brushed stainless steel
• Power supply voltage: 220-253V
• Power supply frequency: 50-60Hz
• Dyson Digital Motor V4 1000W
• Motor speed: Up to 81,000 RPM
• Operating temperature range: 0°-40°C
• Standby power consumption: Less than 0.5 W
• Antibacterial coating
• Reduction of bacteria on external surfaces: Up to 99.9% within 24 hours
• Activation method: Automatic – photocell
• Protection rating: IP35
• HEPA filter included
• Drying time: 14 s
• Automatic shut-off: After 30 s
• Air outlet speed: 549 km/h
• Airflow rate: 21 liters per second
• Noise level: 81 dB
• Device dimensions: Height 159 mm, width 303 mm, depth 286 mm
• Single carton dimensions: Height 284 mm, width 303 mm, depth 291 mm
• Device weight: 4.26 kg
• Single carton weight: 6.76 kg
• Certification: HACCP and QUIET MARK
• Warranty: 5 years

Dyson Airblade Tap Short faucet

• Water flow: 4 l per minute
• Aerator
• Water temperature regulation - optional thermostat (not included)
• Water pressure: 1-8 bar

Suggested sink parameters for Dyson Airblade Tap Short dryer-faucet installation:

• Sink width: min. 350 mm at the front and min. 300 mm at the back
• Sink depth: min. 100 mm
• Material: ceramic or brushed stainless steel sinks are recommended. Avoid chrome or shiny material sinks
• Distance: if Dyson Airblade Tap Short units are installed next to each other, maintain a minimum distance of 580 mm