Dyson Airblade Wash+Dry WD06 Wall combines a washbasin tap and hand dryer. Hands are washed and dried over the same basin, without moving to a separate appliance. Touch-free operation and paper-free drying reduce the need to replenish consumables. 1000 W; 14 s; HEPA; IP35.
Motor unit behind the wall, in a mounting enclosure
Appearance and finish
Color
Steel
Antibacterial coating
Yes
Materials
Housing material
Brushed stainless steel
Mechanism and operation
Activation type
Touch-free sensor
Dimensions and weight
Height (mm)
817.0
Width (mm)
303.0
Depth (mm)
312.0
Weight (kg)
9.51 kg
Mounting and connections
Mounting method
Wall-mounted
Warranty
Warranty (years)
5.0
Warranty Type
door-to-door
Logistics – unit carton
Carton Height (mm)
610.0 mm
Carton Depth (mm)
302.0 mm
Carton weight
13.65 kg
Dyson Airblade Wash+Dry WD06 Wall combines a washbasin tap and hand dryer. Hands are washed and dried over the same basin, without moving to a separate appliance. Touch-free operation and paper-free drying reduce the need to replenish consumables.
Model: WD06 Wall
Mounting: Wall-mounted
Rated power: 1000 W
Drying time: 14 s
Airspeed: 549 km/h
HEPA filtration: 99.95% of bacteria-sized particles from the air used to dry hands
Ingress protection: IP35
Water flow: 1.9 l/min with the standard aerator or 4 l/min with the alternative aerator
Water pressure: 1–8 bar
Temperature control: Thermostatic mixer recommended, not supplied
Automatic flush: Every 24 hours after the last use, for 60 s
Tap dimensions: 303 × 312 mm
Net weight: 9.51 kg
Internal basin dimensions: at least 350 mm wide, 300 mm front to back and 100 mm deep. Adjacent tap centres must be at least 580 mm apart. Ceramic or brushed metal is suitable; avoid highly polished surfaces.
Motor unit behind the wall. The digital brushless Dyson V4 motor dries hands without heating the air. Basin selection and installation must follow the documentation for the specific model.
To provide the best experience, we use technologies such as cookies to store and/or access device information. Consenting to these technologies will allow us to process data such as browsing behaviour or unique IDs on this site. Not consenting or withdrawing consent may adversely affect certain features and functions.
Functional
Always active
Technical storage or access is strictly necessary for the legitimate purpose of enabling the use of a specific service explicitly requested by the subscriber or user, or solely to carry out the transmission of a communication over an electronic communications network.
Preferences
Technical storage or access is necessary for the legitimate purpose of storing preferences that are not requested by the subscriber or user.
Statistics
Technical storage or access is used exclusively for statistical purposes.Technical storage or access is used exclusively for anonymous statistical purposes. Without a subpoena, voluntary compliance by your Internet Service Provider, or additional records from a third party, information stored or retrieved for this purpose alone usually cannot be used to identify you.
Marketing
Technical storage or access is required to create user profiles to send advertising, or to track the user on a website or across several websites for similar marketing purposes.