Dyson Airblade WD04 Low Hand Dryer
- Add feedback:
- Code: WD04 SHORT
- Manufacturer: Dyson
- Manufacturer's code: 5025155034101
Attachments
Read Description Download hand-dryer-dyson-airblade-wd04-short-operation-instruction.pdf (2.8 MB)
Hand dryer Dyson Airblade WD04 Short-Operation instruction hand-dryer-dyson-airblade-wd04-short-installation-instruction.pdf (6.5 MB)
Hand dryer Dyson Airblade WD04 Short-Installation instruction
Dyson Airblade Tap Short hand dryer with low sink faucet 2-in-1:
- Airblade™ hand drying technology in the sink faucet
- Takes up little space
- Washing and drying hands at the sink
- No water on the floor
- Saves water
- HEPA filter captures 99.95% of particles from the air, including bacteria and viruses
- HACCP International certification confirms safety for use in the food sector
- Automatic system flushing every 24 hours helps avoid water stagnation
- Has the Quiet Mark
- Touch-free operation
- Drying time is 14 seconds
- Operating costs are only 140 PLN per year
- Low carbon footprint
Dyson Airblade Tap Short 2-in-1 dryer-faucet parameters:
Dyson Airblade Tap Short dryer
- Housing material: Brushed stainless steel
- Power supply voltage: 220-253V
- Power supply frequency: 50-60Hz
- Dyson Digital Motor V4 1000W
- Motor speed: Up to 81,000 RPM
- Operating temperature range: 0°-40°C
- Standby power consumption: Less than 0.5 W
- Antibacterial coating
- Reduction of bacteria on external surfaces: Up to 99.9% within 24 hours
- Activation method: Automatic – photocell
- Protection rating: IP35
- HEPA filter included
- Drying time: 14 s
- Automatic shut-off: After 30 s
- Air outlet speed: 549 km/h
- Airflow rate: 21 liters per second
- Noise level: 81 dB
- Device dimensions: Height 159 mm, width 303 mm, depth 286 mm
- Single carton dimensions: Height 284 mm, width 303 mm, depth 291 mm
- Device weight: 4.26 kg
- Single carton weight: 6.76 kg
- Certification: HACCP and QUIET MARK
- Warranty: 5 years
Dyson Airblade Tap Short faucet
- Water flow: 4 l per minute
- Aerator
- Water temperature regulation - optional thermostat (not included)
- Water pressure: 1-8 bar
Suggested sink parameters for Dyson Airblade Tap Short dryer-faucet installation:
- Sink width: min. 350 mm at the front and min. 300 mm at the back
- Sink depth: min. 100 mm
- Material: ceramic or brushed stainless steel sinks are recommended. Avoid chrome or shiny material sinks
- Distance: if Dyson Airblade Tap Short units are installed next to each other, maintain a minimum distance of 580 mm