Dyson Airblade WD06 Wall hand dryer

Dyson Airblade Tap Wall hand dryer with high sink faucet for wall mounting 2-in-1:

  • Airblade™ hand drying technology in the sink faucet
  • Takes up little space
  • Washing and drying hands at the sink
  • No water on the floor
  • Saves water
  • HEPA filter captures 99.95% of particles from the air, including bacteria and viruses
  • HACCP International certified for food sector safety
  • Automatic system flushing every 24 hours helps avoid water stagnation
  • Quiet Mark certified
  • Touch-free operation
  • Drying time is 14 seconds
  • Operating costs are only 140 PLN per year
  • Low carbon footprint


Dyson Airblade Tap Wall 2-in-1 dryer-faucet parameters:

Dyson Airblade Tap Wall Dryer

  • Housing material: Brushed stainless steel
  • Power supply voltage: 220-253V
  • Power supply frequency: 50-60Hz
  • Dyson digital brushless motor DC 1000W
  • Motor speed: Up to 81,000 RPM
  • Operating temperature range: 0°-40°C
  • Heater type: None
  • Standby power consumption: Less than 0.5 W
  • Antibacterial coating
  • Surface bacteria reduction: Up to 99.9% within 24 hours
  • Activation method: Automatic – photocell
  • Protection rating: IP35
  • HEPA filter included
  • Drying time: 14 s
  • Automatic shut-off: After 30 s
  • Air outlet speed: 549 km/h
  • Airflow rate: 21 liters per second
  • Noise level: 81 dB
  • Device dimensions: Height in frame 817 mm, width 303 mm, depth 312 mm
  • Carton dimensions 1 pc.: Height 610 mm, width 375 mm, depth 302 mm
  • Device weight: 9.51 kg
  • Carton weight 1 pc.: 13.65 kg
  • Certification: HACCP and QUIET MARK
  • Warranty: 5 years

Dyson Airblade Tap Wall Faucet

  • Water flow: 4 l per minute
  • Aerator
  • Water temperature regulation - optional thermostat (not included)
  • Water pressure: 1-8 bar

Suggested sink parameters for Dyson Airblade Tap Wall dryer-faucet installation:

  • Sink width: min. 350 mm in front and min. 300 mm in back
  • Sink depth: min. 100 mm
  • Material: ceramic or brushed stainless steel sinks are recommended. Avoid chrome or shiny material sinks
  • Distance: if Dyson Airblade Tap Walls are installed next to each other, maintain a minimum distance of 580 mm